Montreal Subaru Club

Tony Montana a écrit :

tech a écrit :

ko-9 a écrit :Vishnu Reset

exact

Excuse my ignorance but what is a "vishnu" reset?

Clique sur le lien pis y vont toute t'expliquer ca

Pour un 2.5rs, est-ce que c'est la même chose et est-ce que ça fait une différence ????

Merci

Gumby a écrit :Pour un 2.5rs, est-ce que c'est la même chose et est-ce que ça fait une différence ????

Merci

You will need to MAINTAIN 2500rpm and 2-5psi for approx 5 seconds.

ca va etre dur a faire avec un RS

Edit: Ok je pensais que tu parlais du "Vishnu Reset" ...

Gumby a écrit :Pour un 2.5rs, est-ce que c'est la même chose et est-ce que ça fait une différence ????

Merci

Si t'as des troubles, d'hésitation, ça aide de faire un reset. Moi je dois le faire là

Par contre, la passe de tenir le régime et le boost, ça s'applique pas

Tony Montana a écrit :

tech a écrit :

ko-9 a écrit :Vishnu Reset

exact

Excuse my ignorance but what is a "vishnu" reset?

It's a quick way to set the advance timing multiplier to maximum (16) if you're properly tuned and in a hurry. It probably doesn't apply to normally aspirated engines although I wouldn't be surprised if there's a similar trick.

Edit: It seems to me that this is a shortcut or some sort of backdoor created by mister Fuji's engineers to quickly maximize the ATM because it doesn't make sense from an ECU learning perspective to advance timing; just because you're holding 2-5psi of boost for 5 seconds that you're going to be totally knock free under load at full boost. Shiv must have stumbled upon it during his endless dyno sessions over the years.

It's sort of an ECU cheat code.

OK I looked at the link at read it all.
Thanks for the added explanation Ko-9

Has anyone tried this "vishnu" reset? Does it work?
Is it better than the usual resets that are done?

I've tried it and yes the results are there


before: 1st gear 9 to 10 psi
2nd 11psi
3rd hardly 13 psi



after and firmly 1st 11psi
2nd 12 to 13 psi
3rd 13 to 13.5

stock wrx 04

Tony Montana a écrit :Has anyone tried this "vishnu" reset? Does it work?
Is it better than the usual resets that are done?

Not better; quicker. Don't have to wait for your ECU to figure out that it's OK to advance timing on its own.


Eventuellement le résultat sera le meme avec un reset ordinaire.

Thanks guys....much appreciated