Butt Spacers on LGT

[04_STi]

Curious to hear from people with mildly dropped LGT's...

I just picked up a set of Bilstein HD's and looking at getting Swift Sport wagon specific springs also.

Curious if I should look at getting butt spacers too, if so, what thickness? and when or what thickness do the tophats need longer studs?

Thanks, Jake

[jproy12]

I was running spacers of 3/8" on my '06 LGT sedan, I was running JDM Bilstein struts with Wangan JDM springs.

All gaps where equal once the spacers where on.

[04_STi]

I was running spacers of 3/8" on my '06 LGT sedan

with a 3/8" spacers did you swap in longer studs on the tophats?

im considering epic engineering springs now too... less drop than the swifts...

and why would you have needed spacers with you had a sedan??

[jproy12]

I was running spacers of 3/8" on my '06 LGT sedan

with a 3/8" spacers did you swap in longer studs on the tophats?

im considering epic engineering springs now too... less drop than the swifts...

and why would you have needed spacers with you had a sedan??

I did get longer studs to accommodate the spacers. As for why, it was almost an even drop front to rear in terms of springs and everything (even though it's stated otherwise), and I hated the saggy butt, so I added 3/8" spacers as I always had something in the trunk as well, came out perfect!

http://legacygt.com/forums/showthread.p ... 8dcd15d6f4&" onclick="window.open(this.href);return false;

[04_STi]

sounds good, thanks JP.