ATF is good for a lot of things I have tried.
*
****
**Interesting Info!**
**Machinist's Workshop magazine tested penetrants for break out torque on**
**rusted nuts with significant results!**
**They arranged a subjective test of all the popular penetrants with the**
**control being the torque required to remove the nut from a**
**"scientifically rusted" environment.**
***Penetrating oil ...... Average load***
**None ....................... 516 pounds**
**WD-40 ................... 238 pounds**
**PB Blaster .............. 214 pounds**
**Liquid Wrench ..... 127 pounds**
**Kano Kroil ............. 106 pounds**
**ATF-Acetone mix....53 pounds**
**The ATF-Acetone mix was a "home brew" mix of 50 - 50 automatic**
**transmission fluid and acetone. Note the "home brew" was better than any**
**commercial product in this one particular test. Our local machinist**
**group mixed up a batch and we all now use it with equally good results. **
**Note also that "Liquid Wrench" is about as good as "Kroil" for about 20%**
**of the price.**
**Happy knuckle busting !*
Ça marche. Ça fait 2 heures que je gosse après une crisse 
Bien ça marche 15min et elle a sortie comme à rien!!!! 
