Montreal Subaru Club

----------------------------------
EDIT: MON dernier post
----------------------------------
est-ce nomal qu'avec le multi-metre je ne voye pas le 12V qui devrait sortir des fils qui von vers le center diff. ?!?

je charche mais je ne trouve pas.

edit:

je parle de ca:

http://www.montreal-subaru-club.com/vie ... lit=wiring" onclick="window.open(this.href);return false;

bon Tab*&!,

Je plug le fils dans le diff...
boom ca marche

on ma expliquer que le 12V est a pulse et qu'il doit passer par le diff pour etre reconnu. (mal de tete !).

electronique terminer, (reste le cluster). et a remonter l'exhaust et L'I/C.

bon maintenant, reste le wiring du cluster.

je commencer seul et defiller ici mes deboire. lol

La partie Harness est ok:
http://www.montreal-subaru-club.com/vie ... 28&t=98250" onclick="window.open(this.href);return false;

1er etape je vais faire un truc comme ca...
http://www.rs25.com/forums/f105/19715-d ... ide-2.html" onclick="window.open(this.href);return false;

Voici les info que j'ai a date:

Stock Harness 99:

------------ = not used

A10> Clock acc.------------ (noting on 99)
A9> YG: Transmission control module = AT oil temp
A8> HOLD ------------
A7> YR: FWD ------------
A6> ABS control module = ABS warning light
A5> Power ------------
A4> LO ------------
A3> Fuel gauge module UNIT
A2> temperature gauge UNIT direct
A1> temperature gauge GND direct


B1> ------------
B2> ------------
B3> ------------
B4> ------------
B5> Door Warning light
B6> Door Warning light
B7> Seat belt light
B8> clock illumination
B9> ------------
B10> ------------
B11> ------------
B12> ??? (LOW FUEL)
B13> Turn light LH
B14> Airbag
B15> Turn light RH
B16> ?!? ------------


C1> Hi-Beam
C2> Hi-Beam Dimmer switch
C3> Illumination control module
C4> Illumination light
C5> ------------
C6> Brake fluide light
C7> GB: ignition switch (temperature gauge IGN)
C8> LR: ? Door Warning light
C9> Engine control module
C10> GY: MT = Vehicule Speed Sensor / AT= Transmission Control Modul
C11> ------------
C12> ------------
C13> B: Ground
C14> Oil pressure Warning light
C15>------------
C16> SL25 ------------
C17> Generator (see C7) Charge warning light
C18> Engine control module = Malfuction indicator light = Check Engine


Stock Harness RS01:

a10/a1 temperature guage or Common ground
a9/a2 temperature guage -> Temp Gauge
a8/a3 fuel guage (Fuel gauge to ECU)
a7/a4 Lo (AWD) switch
a6/a5 Power (TCM)
a5/a6 abs indicator
a4/a7 fwd indicator FWD (TCM)
a3/a8 Hold (TCM)
a2/a9 a/t oil temp indicator
a1/a10 TCM & ECM

b1 ----
b2 ----
b3 ----
b4 ----
b5/ door warning indicator (Left door switch)
b6/ door warning indicator (Right door switch)
b7/ seat belt warning
b8/ clock illumination
b9 ----
b10 ----
b11 ----
b12 ----
b13/ left turn indicator
b14/ airbags warning indicator
b15/ right turn indicator
b16/ odometer

c1/ hi beam1 indicator
c2/ hi beam2 indicator
c3/ illumination GND lamps
c4/ illumination Light lamps
c5 ----
c6/ park break lever/fluid level
c7/ charge indicator POWER +12VDC
c8/ door warning indicator or POWER - Fusebox 23 no2
c9/ tachometer Tach
c10/ tachometer TCM
c11 ----
c12 ----
c13/ speedometer or GROUND
c14/ oil pressure indicator Oil Pressure Light
c15 ----
c16 ----
c17/ charge indicator (battrie)
c18/ malfunction indicator/check engine



Stock Harness 98: What each wire does in the wiring harness, and where it leads to on the stock cluster.

A1> WHT Vehicle speed sensor 2 (back of gauge assembly)
A2> GRN/BLK Vehicle speed signal wire, from tranny
A3> BLK Vehicle speed sensor 2 (back of gauge assembly)
A4> LTGRN/BLK Right turn indicator
A5> BLU/WHT Highbeam indicator
A6> RED Highbeam indicator
A7> -------
A8> RED/WHT CEL
A9> GRN/WHT Oil Pres Indicator (dumby light) and goes to oil pressure switch on front of engine
A10> GRN [color=dark orange]Tachometer[/color]
A11> LTGRN Parking brake indicator/brake fluid level indicator, heads to parking brake switch and brake fluid level switch
A12> BLK/WHT Batter charge indicator
A13> VIO illumination lamps


B1> YEL/BLK Clock
B2> BLK Ground
B3> BLK/GRN Left turn indicator
B4> --------
B5> BLK/BLU Seat belt warning indicator
B6> GRN/WHT Water temperature gauge (hot in ON and START)
B7> GRN/RED Airbag warning light
B8> BLU/RED Door warning indicator
B9> YEL door warning indicator --> interior lights
B10> BLU/ORG door warning indicator --> interior lights


C1> ORG/WHT illumination lamps
C2> BRN/WHT Fuel gauge --> to ECU
C3> YEL/GRN A/T temp warning light
C4> RED/BLK Low Fuel warning lamp
C5> YEL/RED FWD indicator (from Transmission control)
C6> LTGRN/YEL ABS indicator
C7> ??? info not available from Mitchel's
C8> ??? info not available from Mitchel's
C9> ??? info not available from Mitchel's
C10> BLK/RED Temp gauge ground
C11> WHT/GRN Temp gauge signal (from thermometer in top right of engine)
C12> --------
C13> YEL/GRN Clock (hot in ACC and ON)

JDM V4 Harness: This is what the connector leads to on the gauge cluster

A1> BlU/WHT high beam indicator ok
A2> RED high beam indicator ok
A3> YEL door open, interior lights ok
A4> LTGRN ! symbol for parking brake ok
A5> RED/WHT CEL (now in red) Check Engine (ok)
A6> BLK/WHT battery symbol/light ok
A7> BLK/BLU seat belt symbol/light (ok)
A8> GRN/WHT oil drip symbol/light ok
A9> BLU/RED open door warning/light
A10> WHT vehicle speed sensor 2 (SP-)
A11> GRN/BLK vehicle speed signal wire (SPout)
A12> BLK vehicle speed sensor 2 (SP+)
A13> VIO illumination


B1> YEL/BLK clock ilm (ok)
B2> GRN/WHT temp gauge i (ok)
B3> BLK/RED temp gauge g + fuel g + global g (ok)
B4> BLK ground (ok)
B5> -------
B6> BLK/GRN left turn indicator (ok)
B7> GRN/RED airbag symbol/light (?) little compo.
B8> BLU/ORG open door warning indicator/light ok
B9> LTGRN/BLK right turn indicator ok
B10> GRN tach(RPM) signal TA (ok)


C1> ORG/WHT illumination light (ok)
C2> BRN/WHT fuel gauge (FU) (ok)
C3> RED/BLK low fuel warning light (ok)
C4> YEL/GRN hot "thing" warning light (ok)
C5> LTGRN/YEL ABS indicator/light (ok)
C6> BLU/YEL snow flake "HOLD" warning/indicator (ok) -------
C7> PNK Power -------
C8> WHT/BLK small lightbulb housing, with no transparent indicator -------
C9> YEL/RED I/C Spray indicator light (ok)
C10> BRN/RED small lightbulb housing, with no transparent indicator -------
C11> ------- small lightbulb housing, with no transparent indicator -------
C12> WHT/GRN temp gauge (TU) (ok)
C13> YEL/GRN clock acc (ok)

99

99

99

V4 => 99

A1 - C1
A2 - C2
A3 - B5B6C8
A4 - C6
A5 -C18
A6 - C17
A7 - B7
A8 - C14
A9 - B5B6C8
A10 - B5B16C10C9
A11 - B5B16C10C9
A12 - B5B16C10C9
A13 -B8C3C4

B1 - A10
B2 - A2 (see C12)
B3 - A1
B4 - C13
B5 -------
B6 - B13
B7 - B14
B8 - B5B6C8
B9 - B15
B10 - ?

C1 - B8C3C4
C2 - A3
C3 - ? low fuel warning light
C4 - ? ---- hot "thing"
C5 - A6
C6 - ? ---- snow flake
C7 - A5 ----
C8 - ----
C9 - ? ---- I/C Spray
C10 - ----
C11 - ----
C12 - A1 A2
C13 - ? B8C7

Stock Harness 99-01:>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Harness V4:

------------ = not used

Instrument 99 >> V4

Clock illumi. (TCM & ECM) A10 >> B1
Clock acc. ? >> C13
???? Night/Day illumination (clock illumination) ? B8 >> A13 C1 C13
Illumination control module (GND lamps) C3 >> A13 C1
Illumination light lamps C4 >> A13 C1

temp gauge i A2 >> B2
temp gauge g + fuel g + global g A1 >> B3
GB: ignition switch POWER +12VDC (temperature gauge IGN) C7 >> ? C12
temp gauge (TU) ? C7 >> C12
Door Warning light (Left door switch) B5 >> A3B8
Door Warning light (Right door switch) B6 >> A3B8
Door Warning light or (POWER - Fusebox 23 no2)(BAT) C8 >> A9

(LOW FUEL Warning light) ? B12 >> C3
SL25 ------------ C16 >> ?
?!? ------------ (odometer) B16 >> ?
Engine control module (tachometer Tach) C9 >> ?A10A11A12
MT = Vehicule Speed Sensor / (tachometer TCM) C10 >> ?A10A11A12
speedometer or GROUND C13 >> B4
tach(RPM) signal TA ? >> B10

Turn light Left B13 >> B6
Turn light Right B15 >> B9
AirBag B14 >> B7
ABS control module = ABS warning light A6 >> C5
Seat belt light B7 >> A7
Park Brake/fluide level light C6 >> A4
Oil pressure Warning light (oil drip symbol) C14 >> A8
Charge warning light (battrie) C17 >> A6
Engine control module / Malfuction indicator light / Check Engine C18 >> A5
Hi-Beam1 C1 >> A1
Hi-Beam2 Dimmer switch C2 >> A2
HOLD /snow flake ------------(TCM) A8 >> C6
FWD / Hot "thing"------------(TCM) A7 >> C4
Power Light ------------(TCM) A5 >> C7
LO (AWD) switch ------------ / I/C Spray indicator light A4 >> C9
Fuel gauge module UNIT (Fuel gauge to ECU) A3 >> C2
temperature gauge UNIT direct A2 >> B2
temperature gauge GND direct (Common ground) A1 >> B3
AT oil temp A9 >> C8

V4 pinOuts

Voila mes petites Questions:



#1 sur le 99 j'ai le C9:Engine control module C10:MT = Vehicule Speed Sensor / AT= Transmission Control Module sur le V4 A10:vehicle speed sensor 2 (SP-) A11:vehicle speed signal wire (SPout) A12:vehicle speed sensor 2 (SP+) ?

le quel va avec quoi ?

speed sensor 99 = 2 fils ?
et 98 = 3fils ?

#2 sur le 99 j'ai un Fuel A3: et le V4 2 fuel b3: et c2:
99:


Merci beaucoup

sinon si quelqu'un a ca pour 99:http://img25.imageshack.us/img25/3636/01rs.jpg

Petit Update, je crois avoir fini le Pin out.

http://i433.photobucket.com/albums/qq54 ... 4excel.jpg" onclick="window.open(this.href);return false;

il me reste des petites question sur le VSS, le Tach et la Fuel Light.

Je vais surement devoir me runner des fils directe !

(Du speed sensor (3), du cranck sensor (1), et de la tank a gaz (1) ?)

Le speed sensor doit passer par l'ecu pour le cluster ?


______________edit____________

http://www.rs25.com/forums/f105/t19715- ... nside.html" onclick="window.open(this.href);return false;