Page 1 sur 1
P0700
Publié : sam. janv. 24, 2015 5:30 pm
par Guig'z
Subaru Outback 2010 3.6R
L'auto est tombé en Limp mode,
AT oil temp, check engine, cruise, frein a main allumée.
Je le scan, p0700; sa m'aide vraiment pas!
J'ai clearé et le probleme ne revient pas.
Dealer time?
Sent from my iPad using Tapatalk
Re: P0700
Publié : dim. janv. 25, 2015 8:13 am
par huck_this
P0700 Subaru - Transmission Control System Malfunction
Possible causes
- Shorted or open circuit within Transmission Control Module (TCM)
- Faulty Transmission Control Module (TCM)
Since the P0700 is just and informative code, check the TCM for more codes to resolve the problem.
Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Driveability problems
- Transmission shifting problems
P0700 Subaru Description
The Transmission Control Module (TCM) monitors the malfunction of sensors and actuators relating to transmission control. When the TCM detects a malfunction with the control, a signal is send to the Engine Control Module (ECM) to trigger the Engine Light or Service Engine Soon light. The ECM stores the P0700 code and it means the TCM detected a malfunction with the transmission controls.
Re: P0700
Publié : dim. janv. 25, 2015 10:46 am
par Guig'z
Ouais sa je savais mais mon ELM327 ne rentre pas dans le TcM
Ma prendre conger et aller au dealer lundi!
Envoyé de mon iPhone à l'aide de Tapatalk
Re: P0700
Publié : lun. janv. 26, 2015 5:59 am
par huck_this
Guig'z a écrit :Ouais sa je savais mais mon ELM327 ne rentre pas dans le TcM
Ma prendre conger et aller au dealer lundi!
Envoyé de mon iPhone à l'aide de Tapatalk
Tranny code = Subaru select monitor.