Montreal Subaru Club

http://cgi.ebay.com/ebaymotors/2007-Sub ... 274wt_1165" onclick="window.open(this.href);return false;

Plusieurs doivent avoir déjà vu cette bagnole sur nasioc. elle est tout simplement allucinante!
c'est méchant comme set up!

En effet c'est la toute dernierre Top Scoob (#28):

http://www.topscoob.com/2012/04/none-mo ... b-028.html" onclick="window.open(this.href);return false;

Cest une belle voiture mais y vendra jamais ca 35 000$ ... J avais un protegé Mazdaspeed qui m avait couter 60 000$ a monter et j ai reussi a avoir 22 500$ de peine et misere apres UN an d annonce partout ...

Mais il y a une grande différence entre un mazdaspeed et une Sti

Une Sti 06-07 sa vaut encore 25k$ si elle est clean
J'ai pas lu toute sa liste d'épicerie mais je crois qu'il a assez de stock pour rajouter un 10k

Built Block:

2.5 Liter STi (EJ257) semi-closed deck case

Modified forged EJ257 crankshaft

High Performance Main & Rod Bearings

Pauter 4340 Chrome-Moly Forged Rods

CP Forged Pistons w/ Moly Coated Skirts

High Performance Piston Rings

Fully Balanced & Blueprinted

8,500 Rev Limit

P&L Modified Oil Pump

Heads decked, "cleaned up" and pressure tested

ARP Head Studs

Balanced rotating assembly to 10k and .25 grams

APS turbo Inlet

Group N Motor mounts

Cosworth Air Pump Delete

Cosworth timing belt guide

Gates kevlar reinforced timing belt

A/C Delete

GMS 160 T-stat

NGK 1 step colder plugs

Exedy Twin Disk Carbon Clutch

STRI DSD Slim II Gauges 60mm

Oil Pressure

EGT

Oil Temp

ATI triple dash pod with CF face.

STRI Fuel Pressure Gauge

STRI Boost Gauge

HKS Limited Edition Oil cap

"Lots of" -an fittings, Pro-Lite 350 hose and hose finishers.

AEM 3.5 BAR MAP Sensor and Cobb MAP adaptor block.




Engine:

Precision 6466CEA turbo hot side ceramic coated

Tial 44mm V-band EWG

Prodrive EBCS

APS DR525

Perrin CAI

NGK 1 step colder plugs

Perrin Turbo inlet

Perrin ceramic coated Downpipe

2,200cc top feed fuel injectors

Perrin Top Feed fuel rails & -an fittings

Grimmspeed TGV Deletes with coated housings

Aeromotive FPR with -an fittings

Gimmick aluminum radiator

Gates Alt. Belt

Gimmick radiator hoses

HKS Carbon Ti

Greddy BOV

Walbro 420lph Fuel Pump

Perrin crank pulley

Perrin coolant overflow tank

Crawford Type 2 AOS

Snow performance stage 2 progressive methanol kit

Perrin EL header (wrapped)

Optima Red Top Battery

Much heat shielding, ceramic coating, and wraps!!!

Beatrush forged pitch stop mount

Paranoid Fabrications Grounding kit

HKS "Limited" oil cap

Gallery Fresh (Sonoma Red) bolt kit




Transmission and Chassis:

Group N tranny mount

TIC Transmission Crossmember mounts

Cobb Front shifter bushings

TIC Rear shifter bushing

Cobb Short Shifter

WC Lathe Works 1lb sphere

Paranoid Fabrications 3 pc. front subframe

Cusco H-brace

Unabomber Sexy rear end kit

Whiteline Front strut tower brace

Whiteline Rear strut tower brace

JDM Lightweight front bumper beam

Beatrush aluminum pilot shaft bushings

Kartboy exhaust hangers

TiC Giuyngmyo Fender Cowl Braces




Suspension and Braking:

BC Racing Coilovers

Cobb F/R swaybars

Cobb F/R endlinks

DBA 5000 slotted front rotors

DBA 4000 slotted rear rotors

Ferrodo DS2500 F/R brake pads

Goodrich Stainless lines

Castrol Synthetic Brake fluid




Safety and Interior:

Nardi 330mm wheel w/ NRG GEN 2.0 quick release

AutoPower Race Roll Bar with Cross and Harness Bars

Sparco "Ultra" race seats

Sparco harness bar

G-Force 5pt. harnesses

Back seat delete with custom aluminum pan

Red light mod to ALL switches and knobs (HVAC, Gauges, Window and Meth Switches, Radar Detector, Speaker switch, etc.

JDM hazzard button

AEM wideband

Labonte methflow gauge

Prodrive floormats with aluminum heel guard on driver mat

Black WRX door panels and carpet

COBB Shift Knob (flat black)

JDM CF mirror cover

Hardwired Beltronics 995 Radar

Dash painted black (S204 style)

Blacked out interior (Pillars, Trim + Headliner (all painted & dyed black))







Exterior:

Seibon Rear Carbon Fiber Diffuser

CF Rear exhaust shield

CF Front Lip with DIY lip addition

Fog light cover mod for intake

Replica Symms rear wing

NRG Carbon Fiber 1pc roof vane

Tein hood dampers wrapped in Sim...CF

Carbon Fiber B-pillar covers

Lightwerkz front headlight clearing and painting

6000K HID bulbs

JDM Yellow High beams

Carbon Fiber grille and blacked out front STI badge

Custom rear LED tails

All bulbs changed to clear,red,mirrored or LED

Hella Horns Hidden (High + Low tones)

I-badge front

Black front STI badge

Nukabe rear tow hook

Cut, rolled and sealed rear fenders

Tinted (20% front windshield with a 5% sunshade 1/3 of the way down, 5% on the remaining 5 windows)

Custom full wide fender flair kit all around (painted OBP to match)

Custom Front bumper side braces

Enkei RPF1's (Black) 18x10.5 +15mm offset

Hoosier R6's 295/30/18

Shaved + Debadged rear trunk lid

Muteki closed ended lug

pierrelucg a écrit :Built Block:

2.5 Liter STi (EJ257) semi-closed deck case

Modified forged EJ257 crankshaft

High Performance Main & Rod Bearings

Pauter 4340 Chrome-Moly Forged Rods

CP Forged Pistons w/ Moly Coated Skirts

High Performance Piston Rings

Fully Balanced & Blueprinted

8,500 Rev Limit

P&L Modified Oil Pump

Heads decked, "cleaned up" and pressure tested

ARP Head Studs

Balanced rotating assembly to 10k and .25 grams

APS turbo Inlet

Group N Motor mounts

Cosworth Air Pump Delete

Cosworth timing belt guide

Gates kevlar reinforced timing belt

A/C Delete

GMS 160 T-stat

NGK 1 step colder plugs

Exedy Twin Disk Carbon Clutch

STRI DSD Slim II Gauges 60mm

Oil Pressure

EGT

Oil Temp

ATI triple dash pod with CF face.

STRI Fuel Pressure Gauge

STRI Boost Gauge

HKS Limited Edition Oil cap

"Lots of" -an fittings, Pro-Lite 350 hose and hose finishers.

AEM 3.5 BAR MAP Sensor and Cobb MAP adaptor block.




Engine:

Precision 6466CEA turbo hot side ceramic coated

Tial 44mm V-band EWG

Prodrive EBCS

APS DR525

Perrin CAI

NGK 1 step colder plugs

Perrin Turbo inlet

Perrin ceramic coated Downpipe

2,200cc top feed fuel injectors

Perrin Top Feed fuel rails & -an fittings

Grimmspeed TGV Deletes with coated housings

Aeromotive FPR with -an fittings

Gimmick aluminum radiator

Gates Alt. Belt

Gimmick radiator hoses

HKS Carbon Ti

Greddy BOV

Walbro 420lph Fuel Pump

Perrin crank pulley

Perrin coolant overflow tank

Crawford Type 2 AOS

Snow performance stage 2 progressive methanol kit

Perrin EL header (wrapped)

Optima Red Top Battery

Much heat shielding, ceramic coating, and wraps!!!

Beatrush forged pitch stop mount

Paranoid Fabrications Grounding kit

HKS "Limited" oil cap

Gallery Fresh (Sonoma Red) bolt kit




Transmission and Chassis:

Group N tranny mount

TIC Transmission Crossmember mounts

Cobb Front shifter bushings

TIC Rear shifter bushing

Cobb Short Shifter

WC Lathe Works 1lb sphere

Paranoid Fabrications 3 pc. front subframe

Cusco H-brace

Unabomber Sexy rear end kit

Whiteline Front strut tower brace

Whiteline Rear strut tower brace

JDM Lightweight front bumper beam

Beatrush aluminum pilot shaft bushings

Kartboy exhaust hangers

TiC Giuyngmyo Fender Cowl Braces




Suspension and Braking:

BC Racing Coilovers

Cobb F/R swaybars

Cobb F/R endlinks

DBA 5000 slotted front rotors

DBA 4000 slotted rear rotors

Ferrodo DS2500 F/R brake pads

Goodrich Stainless lines

Castrol Synthetic Brake fluid




Safety and Interior:

Nardi 330mm wheel w/ NRG GEN 2.0 quick release

AutoPower Race Roll Bar with Cross and Harness Bars

Sparco "Ultra" race seats

Sparco harness bar

G-Force 5pt. harnesses

Back seat delete with custom aluminum pan

Red light mod to ALL switches and knobs (HVAC, Gauges, Window and Meth Switches, Radar Detector, Speaker switch, etc.

JDM hazzard button

AEM wideband

Labonte methflow gauge

Prodrive floormats with aluminum heel guard on driver mat

Black WRX door panels and carpet

COBB Shift Knob (flat black)

JDM CF mirror cover

Hardwired Beltronics 995 Radar

Dash painted black (S204 style)

Blacked out interior (Pillars, Trim + Headliner (all painted & dyed black))







Exterior:

Seibon Rear Carbon Fiber Diffuser

CF Rear exhaust shield

CF Front Lip with DIY lip addition

Fog light cover mod for intake

Replica Symms rear wing

NRG Carbon Fiber 1pc roof vane

Tein hood dampers wrapped in Sim...CF

Carbon Fiber B-pillar covers

Lightwerkz front headlight clearing and painting

6000K HID bulbs

JDM Yellow High beams

Carbon Fiber grille and blacked out front STI badge

Custom rear LED tails

All bulbs changed to clear,red,mirrored or LED

Hella Horns Hidden (High + Low tones)

I-badge front

Black front STI badge

Nukabe rear tow hook

Cut, rolled and sealed rear fenders

Tinted (20% front windshield with a 5% sunshade 1/3 of the way down, 5% on the remaining 5 windows)

Custom full wide fender flair kit all around (painted OBP to match)

Custom Front bumper side braces

Enkei RPF1's (Black) 18x10.5 +15mm offset

Hoosier R6's 295/30/18

Shaved + Debadged rear trunk lid

Muteki closed ended lug

Si ca sa vaut pas 35k$...mon WRX vaut pas une caisse d'orange dla Floride!:lol:

wow

Pour l'avoir vue en vrai au WBM 2011, elle est hallucinante!

silverf0x a écrit :En effet c'est la toute dernierre Top Scoob (#28):

http://www.topscoob.com/2012/04/none-mo ... b-028.html" onclick="window.open(this.href);return false;

Quelle couleur que c'est ca J-P...?!?!




Ca de l'air NOUERE!!

pis silverfox qui like, s'tait ben sur hahahahaha

c'est pas pire que la sti coswort que lachute on vendu il y a 1 ans ou 2 je sais pas la vente à été conclu a combien mais elle était afficher dans les 55 000$

la sti a james aussi était afficher cher

je suis sur quelle va trouver prenneur

vendu 32 000$ pas si pire hehe!

DAHU a écrit :vendu 32 000$ pas si pire hehe!

effectivement pas trop mal!