Question piston ???

Quelques HPs en plus ??

Modérateur : Modérateurs

Avatar de l’utilisateur
Mach
Scooby Accredited
Messages : 105
Inscription : lun. févr. 02, 2004 7:54 pm
Localisation : Québec

Message par Mach »

Ya tu quelqu'un qui c'est si ma compression est normal ou trop basse !!

135-130-130-130

________
WRX 2002
Rick Hunter
Scooby Accredited
Messages : 88
Inscription : jeu. déc. 06, 2001 1:50 pm
Localisation : Montreal, Canada

Message par Rick Hunter »

~130 seems fine. If there's a large difference (more than 15-20) between cylinders, then that's an indication that the piston rings are going. You're fine.
Avatar de l’utilisateur
Kolia
Tonton
Messages : 19968
Inscription : jeu. déc. 06, 2001 1:50 pm
Localisation : Colombus, Ohio
Contact :

Message par Kolia »

Voila ce que j'ai trouvé...

Manuel Subaru 2002 a écrit :Compression (350 rpm and fully open throttle):
Standard: 951 — 1,147 kPa (9.7 — 11.7 kgf/cm2, 138 — 166 psi)
Limit: 834 kPa (8.5 kgf/cm2, 121 psi)
Difference between cylinders: 49 kPa (0.5 kgf/cm2, 7 psi)
Kolia

2018 Chevrolet Silverado
Rick Hunter
Scooby Accredited
Messages : 88
Inscription : jeu. déc. 06, 2001 1:50 pm
Localisation : Montreal, Canada

Message par Rick Hunter »

It also depends on if the engine was hot/warm/cool/cold.
Répondre