Re: Impreza 2001 RS GC8 Build First Suby
Publié : lun. sept. 12, 2011 4:58 pm
Looks good! 
Page 2 sur 3
Re: Impreza 2001 RS GC8 Build First Suby
Publié : lun. sept. 12, 2011 5:25 pm
Thank you!
Re: Impreza 2001 RS GC8 Build First Suby
Publié : sam. sept. 17, 2011 5:44 pm
I posted a few months ago about my gas pumping issue.
Basically I couldn't freely pump gas into my car without the pump shutting off every liter. It drove me crazy, so I started looking around for the cause. I finally realized my filler neck was rusted beyond belief. Subaru made them wayy to thin
I bought a new one and swapped it out, about 2 hours worth of playing around.
And
Then I cleaned the interior
I didn't however realize that it didn't come with the filler tube shut off valve. I'm going to have to buy one from the dealer on Monday.
Basically I couldn't freely pump gas into my car without the pump shutting off every liter. It drove me crazy, so I started looking around for the cause. I finally realized my filler neck was rusted beyond belief. Subaru made them wayy to thin
I bought a new one and swapped it out, about 2 hours worth of playing around.
And
Then I cleaned the interior
I didn't however realize that it didn't come with the filler tube shut off valve. I'm going to have to buy one from the dealer on Monday.
Re: Impreza 2001 RS GC8 Build First Suby
Publié : sam. sept. 17, 2011 7:24 pm
nice job 
Re: Impreza 2001 RS GC8 Build First Suby
Publié : lun. sept. 19, 2011 10:06 am
amazing :O
Re: Impreza 2001 RS GC8 Build First Suby
Publié : mar. sept. 20, 2011 2:35 pm
Merci Les gars.
Re: Impreza 2001 RS GC8 Build First Suby
Publié : mar. sept. 20, 2011 3:08 pm
Took a few shots. I really need to have the car shot by a professional.
Re: Impreza 2001 RS GC8 Build First Suby
Publié : ven. sept. 23, 2011 6:07 pm
A few months ago I saw a car with an anti-rust device, an electrical pulse that reduces oxidation. I was so stunned by how clean the Corolla was 2001.
I remembered I had bought one when I owned a Sentra and never put it on. So I went through my garage and decided to install it on my day off.
I thought I'd post up the procedure:
Step one Find a place in the hood to secure the device, then connect the positive (red wire) and the one of the grounds to the battery.
Then pass two grounds from battery to trunk. One should go on the left side of the car and the other should be put in the trunk.
Then make sure all lights are on.
Done
-------
Also a shot with the center caps
I remembered I had bought one when I owned a Sentra and never put it on. So I went through my garage and decided to install it on my day off.
I thought I'd post up the procedure:
Step one Find a place in the hood to secure the device, then connect the positive (red wire) and the one of the grounds to the battery.
Then pass two grounds from battery to trunk. One should go on the left side of the car and the other should be put in the trunk.
Then make sure all lights are on.
Done
-------
Also a shot with the center caps
Re: Impreza 2001 RS GC8 Build First Suby
Publié : sam. sept. 24, 2011 12:50 pm
nice job !
Re: Impreza 2001 RS GC8 Build First Suby
Publié : jeu. sept. 29, 2011 12:31 pm
More pics:
Re: Impreza 2001 RS GC8 Build First Suby
Publié : jeu. sept. 29, 2011 9:37 pm
Hey! Nice to see you found MSC bro. I read your entire thread on montrealRacing the other day. Love your car! it looks fantastic!
Re: Impreza 2001 RS GC8 Build First Suby
Publié : jeu. sept. 29, 2011 10:30 pm
Merci,
Thank you!
Thank you!
Re: Impreza 2001 RS GC8 Build First Suby
Publié : mar. oct. 11, 2011 2:59 pm
More pics
And some bad news.
For the past 2 weeks, I've notice a pretty loud knocking noise and what, I believe is a floater valve. I changed the oil and to my horror I found a significant amount of metal flakes.
The next step is to make a choice of what swap I'm going to have done and where.
Ej255
Ej205
Ej207
Ej257
The limiting factors are budget and reliability and the goal is 250awp.
And some bad news.
For the past 2 weeks, I've notice a pretty loud knocking noise and what, I believe is a floater valve. I changed the oil and to my horror I found a significant amount of metal flakes.
The next step is to make a choice of what swap I'm going to have done and where.
Ej255
Ej205
Ej207
Ej257
The limiting factors are budget and reliability and the goal is 250awp.
Re: Impreza 2001 RS GC8 Build First Suby
Publié : ven. oct. 14, 2011 2:30 pm
Re: Impreza 2001 RS GC8 Build First Suby
Publié : dim. oct. 16, 2011 8:14 pm
soundclip of the knocking ?od_man99 a écrit :More pics
And some bad news.
For the past 2 weeks, I've notice a pretty loud knocking noise and what, I believe is a floater valve. I changed the oil and to my horror I found a significant amount of metal flakes.
The next step is to make a choice of what swap I'm going to have done and where.
Ej255
Ej205
Ej207
Ej257
The limiting factors are budget and reliability and the goal is 250awp.