Impreza 2001 RS GC8 Build First Suby
Modérateur : Modérateurs
Règles du forum
UN post par membre par projet
Essayez le plus possible d'inscrire un titre representatif comme: nick / voiture / mods principales
Voici un exemple parfait d'un journal extrement bien détaillé: http://www.iwsti.com/forums/gd-members- ... 109-a.html" onclick="window.open(this.href);return false;
UN post par membre par projet Essayez le plus possible d'inscrire un titre representatif comme: nick / voiture / mods principales Voici un exemple parfait d'un journal extrement bien détaillé: http://www.iwsti.com/forums/gd-members- ... 109-a.html" onclick="window.open(this.href);return false;
-
J-F
- Scooby FREAK
- Messages : 824
- Inscription : sam. janv. 30, 2010 5:35 pm
- Localisation : Boucherville
Re: Impreza 2001 RS GC8 Build First Suby
Looks good!
Audi A6 2.7T 2001 Daily
Jeep XJ 2000 trail/winter
Impreza RSTI 2000
Impreza 2.5 RS 1999 vendu.
Jeep XJ 2000 trail/winter
Impreza RSTI 2000
Impreza 2.5 RS 1999 vendu.
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
Thank you!
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
I posted a few months ago about my gas pumping issue.
Basically I couldn't freely pump gas into my car without the pump shutting off every liter. It drove me crazy, so I started looking around for the cause. I finally realized my filler neck was rusted beyond belief. Subaru made them wayy to thin
I bought a new one and swapped it out, about 2 hours worth of playing around.
And
Then I cleaned the interior
I didn't however realize that it didn't come with the filler tube shut off valve. I'm going to have to buy one from the dealer on Monday.
Basically I couldn't freely pump gas into my car without the pump shutting off every liter. It drove me crazy, so I started looking around for the cause. I finally realized my filler neck was rusted beyond belief. Subaru made them wayy to thin
I bought a new one and swapped it out, about 2 hours worth of playing around.
And
Then I cleaned the interior
I didn't however realize that it didn't come with the filler tube shut off valve. I'm going to have to buy one from the dealer on Monday.
-
icalvit
- Scooby FREAK
- Messages : 1212
- Inscription : dim. juil. 10, 2011 1:20 pm
- Localisation : st-bruno
Re: Impreza 2001 RS GC8 Build First Suby
nice job 
''Icalvit'' ne signifie aucunement que je ne sais pas conduire manuel !!!!!! 
bmw e30 1987 bientôt V8 4L
IMPREZA ts 03 (12/14 - 7/15) , LGT 05 - (06/11 - 11/14), Forester 99 - (10/13 - 03/15)
bmw e30 1987 bientôt V8 4L
IMPREZA ts 03 (12/14 - 7/15) , LGT 05 - (06/11 - 11/14), Forester 99 - (10/13 - 03/15)
-
Lewiz
- Scooby FREAK
- Messages : 2486
- Inscription : jeu. sept. 30, 2010 12:47 pm
- Localisation : Sainte-Catherine, QC
Re: Impreza 2001 RS GC8 Build First Suby
amazing :O
Impreza GF8 '00 ; Sold / Impreza GG '05 ; Sold / Forester SF5 swap WRX '03 stg2 (Lavotek) ; Stolen / Impreza GG '02 ; Sold / Impreza GG '02 ; Sold / Impreza GG '02 WRX Stage...
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
Merci Les gars.
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
Took a few shots. I really need to have the car shot by a professional.
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
A few months ago I saw a car with an anti-rust device, an electrical pulse that reduces oxidation. I was so stunned by how clean the Corolla was 2001.
I remembered I had bought one when I owned a Sentra and never put it on. So I went through my garage and decided to install it on my day off.
I thought I'd post up the procedure:
Step one Find a place in the hood to secure the device, then connect the positive (red wire) and the one of the grounds to the battery.
Then pass two grounds from battery to trunk. One should go on the left side of the car and the other should be put in the trunk.
Then make sure all lights are on.
Done
-------
Also a shot with the center caps
I remembered I had bought one when I owned a Sentra and never put it on. So I went through my garage and decided to install it on my day off.
I thought I'd post up the procedure:
Step one Find a place in the hood to secure the device, then connect the positive (red wire) and the one of the grounds to the battery.
Then pass two grounds from battery to trunk. One should go on the left side of the car and the other should be put in the trunk.
Then make sure all lights are on.
Done
-------
Also a shot with the center caps
-
superpopsss
- Scooby FREAK
- Messages : 1286
- Inscription : dim. juin 19, 2011 9:58 pm
- Localisation : Pierrefonds
Re: Impreza 2001 RS GC8 Build First Suby
nice job !
1999 WRB Impreza 2.5rs coupe --> Sold
2004 PLS Impreza 2.5rs Sedan--> Sold
2007 212 Obsidian Lexus IS350 --> VGA
1998 Dakar Yellow E36 M3 --> Summer car
2003 Sedona Red Pearl WRX Wagon sti v8 swapped --> winter beater
2004 PLS Impreza 2.5rs Sedan--> Sold
2007 212 Obsidian Lexus IS350 --> VGA
1998 Dakar Yellow E36 M3 --> Summer car
2003 Sedona Red Pearl WRX Wagon sti v8 swapped --> winter beater
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
More pics:
-
il09sti
- Scooby Maniac
- Messages : 305
- Inscription : sam. sept. 27, 2008 12:48 am
- Localisation : Laval
Re: Impreza 2001 RS GC8 Build First Suby
Hey! Nice to see you found MSC bro. I read your entire thread on montrealRacing the other day. Love your car! it looks fantastic!
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
Merci,
Thank you!
Thank you!
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
Re: Impreza 2001 RS GC8 Build First Suby
More pics
And some bad news.
For the past 2 weeks, I've notice a pretty loud knocking noise and what, I believe is a floater valve. I changed the oil and to my horror I found a significant amount of metal flakes.
The next step is to make a choice of what swap I'm going to have done and where.
Ej255
Ej205
Ej207
Ej257
The limiting factors are budget and reliability and the goal is 250awp.
And some bad news.
For the past 2 weeks, I've notice a pretty loud knocking noise and what, I believe is a floater valve. I changed the oil and to my horror I found a significant amount of metal flakes.
The next step is to make a choice of what swap I'm going to have done and where.
Ej255
Ej205
Ej207
Ej257
The limiting factors are budget and reliability and the goal is 250awp.
-
od_man99
- Rookie
- Messages : 30
- Inscription : lun. sept. 12, 2011 4:12 pm
-
superpopsss
- Scooby FREAK
- Messages : 1286
- Inscription : dim. juin 19, 2011 9:58 pm
- Localisation : Pierrefonds
Re: Impreza 2001 RS GC8 Build First Suby
soundclip of the knocking ?od_man99 a écrit :More pics
And some bad news.
For the past 2 weeks, I've notice a pretty loud knocking noise and what, I believe is a floater valve. I changed the oil and to my horror I found a significant amount of metal flakes.
The next step is to make a choice of what swap I'm going to have done and where.
Ej255
Ej205
Ej207
Ej257
The limiting factors are budget and reliability and the goal is 250awp.
1999 WRB Impreza 2.5rs coupe --> Sold
2004 PLS Impreza 2.5rs Sedan--> Sold
2007 212 Obsidian Lexus IS350 --> VGA
1998 Dakar Yellow E36 M3 --> Summer car
2003 Sedona Red Pearl WRX Wagon sti v8 swapped --> winter beater
2004 PLS Impreza 2.5rs Sedan--> Sold
2007 212 Obsidian Lexus IS350 --> VGA
1998 Dakar Yellow E36 M3 --> Summer car
2003 Sedona Red Pearl WRX Wagon sti v8 swapped --> winter beater